Skip to main content

Inkplate 6COLOR – Battery

⚠️
This page contains important information about using a battery with Inkplate 6COLOR. For safety reasons, please read this page carefully!

Inkplate 6COLOR includes a 2-pin 2mm JST connector, allowing you to connect a 3.7V Li-ion battery. The onboard charging IC, MCP73831, automatically charges the battery when Inkplate is plugged into USB-C, and it switches to battery power when unplugged. A charging indicator LED provides real-time charging status.

Inkplate 6COLOR battery JST connector
JST battery connector
Inkplate 6COLOR Onboard charging indicator LED
Onboard charging indicator LED
ℹ️
The correct battery polarity is crucial! Check the markings on the PCB before connecting a battery. When orienting the JST connector with the notch at the top, the positive (+) terminal is on the left, and the negative (-) terminal is on the right.
Battery polarity on Inkplate 6COLOR
Battery polarity on Inkplate 6COLOR
⚠️
Battery polarity can vary! Some Li-ion batteries have reversed polarity. Connecting a battery with the wrong polarity may permanently damage your Inkplate! Double-check before plugging it in.

Compatible batteries​

Inkplate 6COLOR is compatible with 3.7V Li-ion batteries with protection. If you purchased the Inkplate 6COLOR enclosure and battery kit, it includes a 3000mAh 3.7V Li-ion battery with a built-in protection circuit.

3.7V li-ion battery with protection
3.7V li-ion battery with protection

Any of Soldered’s 3.7V Li-ion batteries will work as long as they fit inside your enclosure.

ℹ️
Due to shipping restrictions, we cannot ship Li-ion batteries outside the EU. If you're in the US, we recommend checking out Adafruit's Li-ion battery stock.

Check out our battery documentation page.

Charging IC (MCP73831)​

The MCP73831 is a compact, single-cell Li-ion/Li-Polymer charge management controller. It regulates the charging process, ensuring safe and efficient charging via USB. The chip follows a constant-current / constant-voltage (CC/CV) charging profile, automatically switching to trickle charge when the battery nears full capacity.

Key features:

  • Automatic charge termination when the battery is full
  • Overvoltage and overcurrent protection
  • Charge status indicator (connected to the onboard LED)
ℹ️
For full technical details, refer to the MCP73831 datasheet:

MCP73831/2 Data Sheet

Official data sheet for MCP73831/2 charger by Microchip