Getting started
MicroPython module
To install the MicroPython module, download it from the GitHub repository:
IIS2DULPX Accelerometer breakout MicroPython module
A MicroPython module for the Soldered IIS2DULPX Accelerometer breakout board
ℹ️
First time MicroPython user? For a detailed tutorial on how to get started with MicroPython, see this section of our docs:
Getting started with MicroPython
A comprehensive tutorial on how to set up and upload code for the first time on a MicroPython board, from scratch!
Connections
Below is an example connection diagram for Dasduino CONNECTPLUS. These pins will be used in the examples throughout this documentation.
| Dasduino CONNECTPLUS | Breakout Board |
|---|---|
| Qwiic | Qwiic |
ℹ️
If you prefer, you can use I2C pins to manually connect:
| Dasduino CONNECTPLUS | Breakout Board |
|---|---|
| IO21 (Default SDA pin) | SDA |
| IO22 (Default SCL pin) | SCL |
| VCC | VCC |
| GND | GND |
⚠️
The IO21 and IO22 pins can differ for your personally used board, so make sure to validate the information before you start working!
If you also want to use interrupt-based features (wake-up, tap detection, etc.), connect one of the interrupt pins:
| Dasduino CONNECTPLUS | Breakout Board |
|---|---|
| Any digital input pin | INT1 or INT2 |