Deep sleep

Using deep sleep matters if you want your Inkplate 13SPECTRA sketch to get the most out of a battery. E-paper doesn't need power to hold the image on screen, so Inkplate 13SPECTRA draws little to no current in deep sleep mode, and a sketch can run for months on battery.

---

#define uS_TO_S_FACTOR 1000000 // Conversion factor for micro seconds to seconds
#define TIME_TO_SLEEP  20 // How long ESP32 will be in deep sleep (in seconds)
void setup(){
    // your code
    ///...
    esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR); // Activate wake-up timer -- wake up after 20s here
    esp_deep_sleep_start(); // Put ESP32 into deep sleep. Program stops here.
}

esp_sleep_enable_timer_wakeup()

This function enables wakeup by timer.

Returns type: int

Returns value: Returns ESP error code

Function parameters:

Type	Name	Description
uint64_t	time_in_us	Wakeup time in microseconds.

esp_deep_sleep_start()

This function enters deep sleep with the configured wakeup options.

Returns type: None

---

Wake on button press

To wake up using the Wake button, call the ESP32 function esp_sleep_enable_ext0_wakeup() before putting it to sleep.

// Go to sleep for TIME_TO_SLEEP seconds
esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);

// Enable wakeup from deep sleep on GPIO 18 (wake button)
esp_sleep_enable_ext0_wakeup(GPIO_NUM_18, LOW);

// Go to sleep
esp_deep_sleep_start();

esp_sleep_enable_ext0_wakeup()

This function uses the external wakeup feature of the RTC_IO peripheral.

Returns type: int

Returns value: Returns ESP error constant

Function parameters:

Type	Name	Description
gpio_num_t	gpio_num	GPIO number used as wakeup source. Only GPIOs with RTC functionality can be used.
int	level	Input level which will trigger wakeup.

---

Full example

Check out the full examples from this page, along with many more usage options below:

Inkpate13SPECTRA_Wake_Up_Button.ino

Full example of waking Inkplate 13SPECTRA from deep sleep using the onboard wake button.